The Criteria For R-22 Replacement Refrigerant Selection

If you have decided to finally replace the Freon that is in your refrigeration system, you will want to choose something that is useful. It needs to provide you with a higher level of efficiency, and should also be capable of helping the environment. One of the drawbacks to R-22 was it’s capability of depleting ozone in the atmosphere. When it was released, becoming a gaseous state, it would eventually circulate high into the atmosphere, coagulating at the southern hemisphere. This is how scientists were able to discern that there was a problem with the ozone, creating a hole the size of Antarctica literally over that continent. Although this was a detriment to this protective layer of atmosphere, one that protects us from harmful radiation, it was also what led us to understanding that Freon needed to be replaced. This prompted the creation of several different types of refrigerants that could serve as replacements that were not capable of disturbing ozone at all. Even better, there were other byproducts that were beneficial such as reducing CO2 emissions. Here is the criteria that you should follow if you are going to find a replacement for R-22 in your refrigeration or cooling system.

 

What Type Of Replacement Should You Use?

The replacement that you use should be one that is exceptionally efficient. For example, you should be able to operate your machinery at a much higher level of efficiency with less electricity. Some of these are capable of extracting more heat than Freon, yet they will not be as compressed. Inside of an air conditioning unit, for instance, there is a compressor which causes the condensed liquid to become exceptional at extracting heat from the air. In this state, Freon was in a gaseous state, and would subsequently go through a condenser. This circulating liquid and gas was very efficient, but because of its problems, different products were created.

Different Types Of Refrigerants That You Could Use

Some of the top refrigerants include R-407C which consists of chemicals like difluoromethane and 1,1,1,2-tetrafluoroethane. There is also R-134A, a component that is a blend of chemicals that is very safe to use. If you want the most efficient, there are those that say that TDX 20 by Bluon is really the best. They say this for several reasons. It is one of the few that is more effective at lower amounts of pressure at absorbing heat. It also can help machines, such as those that produce electricity, to produce far fewer CO2 emissions. It is the efficiency level of these machines after the new refrigerant is added, along with not producing any byproducts which can affect the world adversely, that makes changing over so important. These are just a few of the many different types of coolants that you will want to consider.

What Is The Criteria For Making Your Choice?

There are three specific criteria that you need to consider when changing over to a new type of refrigerant. First, consider how this will affect the environment. As we all know, Freon was extremely bad, effectively destroying the ozone layer. Second, consider the reduction of CO2 emissions which is possible when these coolants are used with specific machines. Finally, you need to use a refrigerant that will save you money, specifically cutting back on how much electricity you are going to need. Of all of these, TDX 20 would be at the top of your list because it fulfills all three types of criteria that make it exceptional. It’s also one of the few that has so many different chemicals that are in a perfect configuration to improve your machines once this coolant is installed.

How Will You Exchange Your Existing Refrigerant For A New One?

It’s possible to switch this out once you have a local HVAC company come to your location. They will evaluate your machinery, and based upon their assessment, they can give you a quote. You might be able to tell them what you need to do over the phone. The price is typically based on each individual extraction of the old coolant, plus placing the new coolant in its stead. This will make it very easy to come up with a total amount that you will pay for this procedure.

Will It Cost Very Much To Get This Done?

There is an initial cost associated with getting all of this done which could be thousands of dollars. The hesitancy that many people have in replacing R-22 is almost always because of the cost. There are some people that really do like to use Freon, and that’s because it does perform well. However, when you have a product like TDX 20 on the market, you will see that it will pay for itself very quickly through the savings you will obtain by operating your equipment.

How Long Will It Take To Add The New Coolant?

Removing the old coolant, and replacing it with something new, is something that you will be able to do very quickly. The experts that you will hire to exchange coolants should be very adept at getting this done. They will have the tools and equipment necessary to do this in an expedient manner, and once the new coolant is in, you will see a noticeable difference. The efficiency levels of your equipment, and the reduction of CO2 by reducing how much electricity your machines will use, are just a few of the benefits that you will notice.

This simple criteria for choosing a replacement for R-22 from http://www.bluonenergy.com should show you how easy this is. In fact, you won’t have to do anything on your own. It’s a matter of having the money, and also contacting the right HVAC professional, that can do the replacement. The speed at which it will be replaced is dependent upon the competency of the person you are hiring and how much refrigerant you need to remove initially. It should be very easy to find a professional to help you, and even easier to do this exchange.