Environmental Site Assessment is a comprehensive process from Phase I to Phase IV that are collaboratively known as Environmental Remediation. In Phase I, site assessment is done visually and based on the history and available records of the property. Additionally, the nature of activities on surrounding sites is also considered, as these are can impact underground water, soil and environment. Phase I report is often necessary, because banks and financial institutions want to know if the land or commercial site has any possible risks. For the buyer, it is important to understand the true value of the property. In case sources of contamination have been cited in the Phase I report, additional Phase 2 testing must be done. Here’s a quick take.
Know Phase 2 better
If you check évaluation environnementale Ortam Groupe, you will realize that Phase 2 is all about taking samples. In regular words, this phase is about environmental characterization. Soil samples are taken and sent to an accredited laboratory to find the possible rate of contamination. Depending on the location, limit concentrations can be ignored and depend on the zone of the site. Phase II is particularly important because it determines if site rehabilitation is necessary in the third step. If yes, the experts move to Phase III.
Phase 2 environmental assessment is done in the following steps
- Planning a sampling plan and selecting the right equipment
- Conducting surveys as per the plans
- Taking representative samples from the site
- Sending the samples to an accredited laboratory for testing
- Preparing the final report, based on the standards set by relevant department.
Limit values allowed by the concerned ministry in such case is then considered to understand if the contamination rate needs further focus. The detailed report will be given to the buyer or concerned client, so that relevant conclusions can be drawn. The investigation is stopped in case the contamination rate doesn’t exceed the suggested limits. On the other hand, anything identified beyond the applicable limits must be followed by the Phase III of site assessment.
If you want help and suggestions for Phase 1 and Phase 2 environmental assessment, consider finding a company that specializes in all the four phases. They should be able to offer assistance with the initial work and must ensure that the remediation and rehabilitation is done in the right way. Check online now to find more on Phase 2 environmental assessment.